|
|
 |
| 2020/08/13 |
| 제목 : [업데이트]SAE AIR6825 2020 Edition, August 2020 외 25종
|
| 글쓴이 : 고객지원팀 |
SAE AIR6825 2020 Edition, August 2020
Identification and Assessment of Damage to Composite Aircraft Structures Training Documen
SAE AMS4153 Revision M, August 2020
Aluminum Alloy, Extrusions 4.5Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T6) Solution and Precipitation Heat Treated
SAE AMS4907 Revision M, August 2020
Titanium Alloy, Sheet, Strip, and Plate 6.0Al - 4.0V, Extra Low Interstitial Annealed
SAE AMS5050 Revision L, August 2020
Steel Tubing, Seamless 0.15 Carbon Maximum Annealed
SAE AMS5667 Revision P, August 2020
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable
SAE AMS5704 Revision L, August 2020
Nickel Alloy, Corrosion and Heat Resistant, Forgings 57Ni - 19.5Cr - 13.5Co - 4.6Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated
SAE AMS5706 Revision N, August 2020
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F Solution Heat Treated
SAE AS10380 Revision A, August 2020
(R) COUPLING INSTALLATIONS, STANDARD CONDUIT, ELECTRICAL
SAE AS3139 Revision C, August 2020
(R) STUD, STEPPED - 2.5 DIA ENGAGEMENT, PD SHANK, UNS S66286 .2500-28 UNJF-3A X .1900-32 UNJF-3A
SAE AS5270 Revision A, August 2020
(R) Bolts, Screws and Studs, Nickel Alloy, UNS N07718 Work-Strengthened, Tensile Strength 220 ksi Procurement Specification
SAE AS5528 Revision E, August 2020
Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting
SAE AS5900 Revision D, August 2020
(R) Standard Test Method for Aerodynamic Acceptance of AMS1424 and AMS1428 Aircraft Deicing/Anti-Icing Fluids
SAE AS59158 Revision A, August 2020
Tools, Inserting and Extracting Helical Coil Wire Screw Thread Inserts Inch and Spark Plug Sizes
SAE AS893 Revision F, August 2020
FITTING, TEE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE ON SIDE, EXTERNAL THREAD
SAE AS894 Revision D, August 2020
FITTING, TEE, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE ON RUN, EXTERNAL THREAD
SAE AS895 Revision D, August 2020
FITTING, ELBOW, 45°, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD
SAE AS896 Revision D, August 2020
FITTING, NIPPLE, REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD
SAE AS897 Revision F, August 2020
FITTING, ELBOW, 90°, STANDARD AND REDUCER, FLARELESS TUBE TO PIPE, EXTERNAL THREAD
SAE EPR2020015 2020 Edition, August 5, 2020
Unsettled Issues Facing Automated Vehicles and Insurance
SAE ITC TS138 Amendment 1, June 2020
MANUFACTURING SPECIFICATION FOR INSERTS, IMPERIAL, THINWALL, SCREW LOCKING, (INCONEL 718) SILVER COATED
SAE ITC TS138 7th Edition, June 2020
MANUFACTURING SPECIFICATION FOR INSERTS, IMPERIAL, THINWALL, SCREW LOCKING, (INCONEL 718) SILVER COATED
SAE ITC TS41 Amendment 1, June 2020
MANUFACTURING SPECIFICATION FOR INSERTS, SCREW THREAD, UNIFIED, SCREW LOCKING, HELICAL COIL, BS HR503 (NIMONIC 90), SILVER COATED
SAE ITC TS41 7th Edition, June 2020
MANUFACTURING SPECIFICATION FOR INSERTS, SCREW THREAD, UNIFIED, SCREW LOCKING, HELICAL COIL, BS HR503 (NIMONIC 90), SILVER COATED
SAE J1798/1 2020 Edition, August 2020
Recommended Practice for Performance Rating of Lead Acid and Nickel Metal Hydride Electric Vehicle Battery Modules
SAE J2039 2020 Edition, August 2020
(R) Side Turn Signal Lamp for Long Vehicles
SAE J2403 2020 Edition, August 2020
Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature |
|
|
|
|